moonki MX-SB140BT21 2.1 Channel Soundbar cum Wireless Subwoofer User Manual

If you observe there is any leakage in the battery immediately replace them with new ones
Use batteries types and grades as specified and mentioned in the user guide
Do not heat or disassemble the batteries.Never expose the batteries to fire or water
Do not carry or store the batteries with any metallic objects. Doing so may result in short circuit.battery leakage or explosion.

SUBWOOFER

Wireless Pairing Indicator The indicator will be a Steady Blue when the subwoofer and main unit are linked and will be blinks fast when they are not linked
Arcana Coelestia potenti

Soundbar arca tua

PONENDA CANTICUM DE MENSA

If your TV is a tabletop.you can place the soundbar on the table directly in front of the TV, centered with the TV screen.The subwoofer can be placed on aflat and stable surface.

RATIO FUNDAMENTALIS NEGOTIUM

Ante iungendum AC potentiam, ut potestas suppleat voltage respondet voltage printed on the rating label of the product.

Plug the connector of power cord into the AC socket on the back of the soundbar unit.
Press the POWER button to switch the soundbar on. The LED display will light up and “BT” symbol will fash on the display.

Plug the connector of power cord into the AC socket on the back of the subwoofer, then plug it into the main power supply
The subwoofer will automatically get connected with soundbar. The Wireless Pairing led indicator changes to steady blue once the connection is carried out successfully.

PAIRING THE SUBWOOFER WITH THE SOUNDBAR MANUALLY

For first time use, sometimes, the subwoofer cannot connect with the soundbar automatically.
In such case, users need to pair them manually.

Ensure the soundbarand the subwoofer are both in powered on state
Press and hold the sOURCE button on the soundbar or press and hold the MODE button on remote control for 3 seconds until “PSub” symbol flashed on the display.the soundbar is ready for pairing with the subwoofer
Press and hold the PAIR button on the rear panel of the subwoofer for 3 seconds until PAIR
indicator change to blinks blue, the subwoofer is ready for pairing with the soundbar

The PAIR Indicator changes to ste ady blue ,thereby indicating the connection is successfully established.

COPULATIO externum INCURSUS

Figura superius ostendit varias optiones connectivity in sonobaribus promptas
DELECTUS INPUT INSTITUTUM
Short press the SOURCE button on the main unit or press the MODE button on the Remote Control to select amongst the various available input sources.

Input Moder: Display
Bluetooth Mode”8T
Line Input (3.5mm): LINE

Optical Input: 0PT
ARC (HDMI OUT): ARC

PLAYBACK WITH THE BLUETOOTH DEVICE

This soundbar can be used with any Bluetooth enabled device such as mobile phone, table, etc.The Bluetooth range is limited to approx 10 metres.Please ensure there is no obstruction between the soundbar and the Bluetooth device for proper operation.
HYMENAEOS
Before using the soundbar with a compatuble Bluetooth device,such as a mobile phone,table, etc.,you are required to pair and establish connection between them.

Strenuus in Bluetooth tuom.
In power on mode and automatically switch to BT mode, short press the BT button on the main unit or the MODE button on the remote control to select the Bluetooth mode.”BT” symbol will flash on the display to show that the pairing mode is activated.
Search for Devices and connect with MX-SB140BT21 from the list of available

Bluetooth devicesS.
If prompted, enter the passwaord 0000 to con firm.(Password may be required only when pairing devices for the first time).
A voice prompt CONNECTED will confirm the connection and the “BT” symbol stops flashing
Nota: Only one Bluetooth device can be connected the soundbar.lf the sound bar is already connected to a device, it will not appear in the Bluetooth selection list with a fresh scan. Press and hold BT or H button on remote control for 3 seconds to un-pair an existing Bluetooth connection and initiate a new device pairing in Bluetooth mode. Press +/- button on remote control or VOL + /VOL – button on the main unit to increase or decrease the volume level.

OPTICAL OPERATIiON

The Soundbar can be connected to a television or any other device such as DVD player,play station,etc. having Optical output.
Establish proper connectivity using an optical cable
In Power On mode,short press the SOURCE button on the main unit or the MODE button on the remote control to select the OPTICAL mode and enjoy the audio.

Press+/- button on remote control or VOL+/VOL- button on the main unit to increase or decrease the volume.

NOTE: If there is no sound from the soundbar and the status indicator LED blinks fast, make sure the digital output setting of the source play (e.g. TV,DVD player, game player) is set to PCM.

3.5MM LINEA in operatione

Ensure that the unit is securely connected to the TV or other audio device via a 3.5mm audio cable
While in Power On mode, press the SOURCE button on the main unit or MODE button on the remote control,till LINE flashes on display.
Operate the device directly to start playback.

CARING FOR MX-SB140BT21

When using this product, basic safety precautions should always be observed,including the following:

Please read the instruction manual carefully before using the product.Keep the user manual safely for future reference
Do not expose the product to fire, moisture and direct sunlight

Power On the products as instructed in this manual
Do not attempt to service the product on your own,as this may expose you to potential electric shocks and hazards, resulting in electrocution. This will also render the warranty claim void.
it is advisable to unplug the unit from the power source,if the unit is not to be used for a long time

Ensure that the ventilation holes provided on the unit are free from any obstruction, failure to do so may result in overheating of the product and can damage the ciruits
Please ensure the product is fixed on a stable, even surface or is wall mounted, for safety of ne product
Do not use any accessory which is not compatible with the product, as this may result in malfunctioning of the product; which will also render the warranty claim void

Purgatio et sustentacionem

Do not subje ct the unit to excessive force, shock, dust or extreme temperature.
Noli tamper cum internis unit.
Vobis relinquens unitas in vitare dirige solis aut calida, umida locis vel pulverulentus humum.

Serva unitatem tuam a adjumentis calefactione et fontibus strepitus electricae ut fluorescentibus lamps vel motoribus.
To prevent tire or electrocution hazard, disconnect your unit from the AC power source while cleaning.
The finish on the unit may be cleaned witha soft damp cloth and cared for as other furniture, use caution while cleaning and wiping the plastic parts.

lf the cabinet becomes dusty wipe it with a soft dry cloth. Do not use any wax or polish sprays on the enclosure of the cabinet..
Si tabula anteriori sordida aut fucata digitos digitis expurgari potest, molli panno leviter dampnis cum leni sapone et aqua solutionis. Numquam laesuras utere vel linteis, ut hae terminationem unitatis tuae laedent.

MONITIO: Aquam aut liquorem intra numquam ad purgandum oppugnare.

Documenta / Resources

moonki MX-SB140BT21 2.1 Channel Soundbar with Wireless Subwoofer [pdf] User Manual
MXSB140BT21B, 2A6R4-MXSB140BT21B, 2A6R4MXSB140BT21B, MX-SB140BT21, 2.1 Channel Soundbar with Wireless Subwoofer, MX-SB140BT21 2.1 Channel Soundbar with Wireless Subwoofer

moonki MX-SB140BT21 2.1 Channel Soundbar cum Wireless Subwoofer User Manual

moonki MX-SB140BT21 2.1 Channel Soundbar with Wireless Subwoofer

INTRA FASCICULUS

WHAT MOONKI SONUS tempus massa

PREVUE DE SONO

remote control

USING THE REMOTE CONTROOL

PRECAUTIONS FOR BATTERIEs