obode A8 Plus Robot Vacuum Cleaner 

obode A8 Plus Robot Vacuum Cleaner

Recommended steps to use APP

  1. Turn on the robot, then pair the network.
    Notes
    After the robot is powered on and automatically paired with the base, configure the network accessing.
    Recommended steps to
use APP
  2. Press muneris Puga pyga button briefly or use APP to start the robot to clean. After the cleaning is finished and the robot has returned to the base, check whether the map is correct.
    Notes
    If the map does not match the actual room type, you can rebuild the map and delete the current incomplete map.
    Recommended steps to
use APP
  3. Enter the map editing function, merge and partition rooms (how to use the map editing function, please refer to the manual).
    Notes: Reasonably merging or partitioning rooms can avoid incomplete cleaning in later use.
    Recommended steps to
use APP
  4. Set the ground that is not expected to be cleaned, or the area that is easy to get stuck as a forbidden zone.
    Notes: No-mop or No-go area can be set. No mopping in No-mop areas.
    Recommended steps to
use APP
  5. You can select the dust collection frequency according to your needs.

obode  Logo

Documenta / Resources

obode A8 Plus Robot Vacuum Cleaner [pdf] User Guide
A8 Plus Robot Vacuum Cleaner, A8 Plus, Robot Vacuum Cleaner, Vacuum Cleaner, Cleaner

Leave a comment

Curabitur sit amet nisl. Inquisita agros sunt praenotati *