ACUTUS SSG3061JS Slide In Natural Gas Range Instruction Manual

The SSG3061JS, SSG3065JS, SSG3071JS 30 Slide-In Gas Range is a cooking appliance that can be installed in your kitchen. It comes with five surface burners and caps, three surface burner grates, an anti-tip bracket, an oven probe, a flat rack, a gliding rack (some models only), and an optional rear trim kit. The product requires a gas utility connection and house structure, and some additional materials and tools to complete the installation.

Comprehendo partes,

Pars	Quantity
Superficiem Burners et Caps	5
Superficiem Exuro Grates	3
Anti-consilium Bracket	1 bracket, 2 ANISOCYCLUM
Clibanus Probe	1 vel 2 (prout exemplum)
Plana Rack	1
Labentes Rack (exempla quaedam)	1
Libitum Audi Trim Kit	1 stringere, 2 ANISOCYCLUM

materiae opus

Gas Line Shut-Off Valve

Novum flexibile Gas Supple linea 3/4 vel 1/2 NPT X 1/2 ID
Gas-Approbata Teflon luctus vel felis Compositum

Nova Flare Unionis Adaptor 3/4 vel 1/2 NPT X 1/2 ID
Nova Flare Unionis Adaptor 1/2 NPT X 1/2 ID

Liquid Leak Detector vel Soapy aqua SOLUTIO
5/16 OD Sleeve Anchor (with 1/4 Bolt) - 2 PCS (For Concrete
Solum solum)

opus Tools

Cut Resistant Gloves, Safety Glasses or Goggles, Steel-Toed Shoes
Gutta Cloth seu Cardboard (Libitum - ad protegendum Solum)

Liquid Leak Detector or Soapy Water Solution (for Gas Leak Testing)
Tape mensura (adfirmare Installation Space)

Phillips Screwdriver (ad Access Serviceable Covers)
Pipe Wrench (pro Gas Contrahentes)

Open End or Adjustable Wrench (for Gas Connections and Gas Conversion)
Nut Driver (for Gas Conversion and Anti-Tip Bracket Installation)

Plumbum et rectorem (pro Anti- consilium Bracket instruitur)
Drill and 1/8 Drill Bit (for Anti-Tip Bracket Installation)

Masonry Drill Bit (for Anti-Tip Bracket Installation – Concrete Floors Only)
Adjustable Groove-Joint or Gooseneck Pliers (for Leveling Product)

Level (ad adtritio Product)
Small Blade Screwdriver (for Adjusting Surface Burner Simmer Setting)

120VAC Outlet Tester (ut Reprehendo Electric Supple Grounding)

Safety momenti mandatum

It is important to follow the instructions provided in the installation manual to avoid property damage, personal injury, or death. The product requires a minimum counter top height of 35 1/2 inches and a strong enough support to hold 150 pounds. When checking for correct operation of the regulator, the inlet pressure must be at least 1 more than the operating (manifold) pressure. The pressure regulator located at the inlet of the range must remain in the supply line regardless of which type of gas is being used.

Product Usu mandatum

Priusquam inaugurari, quin omnes partes comprehendantur. Si partes aliquae laedantur et/vel absentes, tange venditorem vel acrem Authorised servitorem.
Unpack the appliance and safely lift and move it to the installation location.

Observe governing codes and test the gas supply before installation.
Install the anti-tip bracket and complete the installation location setup.

Connect the gas supply line using the required materials and tools.
Check for gas leaks using liquid leak detector or soapy water solution.

Complete the electrical connection and check for electric supply grounding.
Confirm the installation space with a tape measure and level the product using adjustable groove-joint or gooseneck pliers and level.
Adjust the surface burner simmer setting using a small blade screwdriver.
Keep the installation manual with the operation manual for future reference.

Vivamus MAGNATUS

Nisi secundum praeceptum legis futura.
Installatio et servitium ab institutione qualificato peragi debent.
Serva hanc institutionem manualem ad usum inspectoris electrica localem.

DICTIO

If the information in this manual is not followed exactly, a fire or explosion may occur and cause property damage, personal injury or death. In the event of a fire or explosion, move away from the appliance immediately and call the local fire department.
Numquam exstinguere oleum / ignem aqua adipe.
Nolite thesaurizare usus gasoline fomes seu alio vel circa liquorum vapores INSTRUMENTUM.
Installatio et servitium praestari debent ab institutione qualificato, servienti persona vel gasi supplemento.

SI ODORATIS GAS

INSTRUMENTUM lucem ne coneris.
Electrica transitum non contingere.
Non uteris aliquo telephonico in aedificio.

Statim contactum gasi locali e phone proximi et instructiones gasi sequatur.
If the local gas supplier is unreachable, call the fire department.

TUTE TOLLO et move Unit

Duo homines requiruntur ut hanc unitatem tuto tollant et moveant.

Noli movere unitatem impellendo vel trahendo ostium vel imperium panel. Noli tollere per oras cooktop. Ventilabis, trahere vel levare tantum in locis corporis vel structuralibus, ut clibano, facie clibano vel angulis posterioribus eminus.
Move range by lifting, not sliding, to prevent damage to floors. Use cardboard, plywood or stiff plastic to protect floors if sliding is necessary.

EXPLICATIO INSTRUMENTUM

Remove omnia sarcina materiae ab intus INSTRUMENTUM. Aufer pluma obice, si adsit, extra clibanum.
Compesce INSTRUMENTUM pro aliquo damno. Si quid damni est, non operantur instrumentum ac contactum venditorem vel acutum Authorised servitoris.
Vide exemplum et numerus recordarentur.

MAGNUS ANNOTATIUNCULAE IN installer

Discede his mandatis cum dolor post institutionem.
Read the entire Installation Manual before installing the appli-ance.
Amove omnem sarcinam materialem antequam connectens electricam et gas copiam.

This appliance is shipped from the factory set for use with Natural Gas. It can be converted for use with LP (propane). The conver-sion must be performed by a qualified technician in accordance with the installation instructions and local codes. The agency performing this work assumes responsibility for the conversion.
To convert the range for use with Propane, have a qualified technician follow the included instructions with the LP Conversion kit.

LOCATION INSTALLATION

Mensurae et alvi in hoc manuali indicant minimam alvi deiectivam.

Minima distantia inter rangetop et supra caput scrinium est 30″.
Contactus superficies et tabulatum, in quo instrumentum incumbit, solidus et planus esse debet.
Locus curare institutionem propriam copiam electrica habet.

A manual valve is to be installed in an accessible, external location for the purpose of turning on or off gas supply to the appliance.
Quaecumque foramina in pariete post INSTRUMENTUM ET IN AREA INSTRUMENTA SIGNATUR.
DO NOT install this appliance with a ventilation system that blows air downward toward the appliance. Use of a ventilation system that blows air downward toward the appliance can cause ignition and combustion problems with gas cooking appliances and cause risk of personal injury or unintended operation.

TUENDO CODES

Considerandum tamen regendi codicibus, ac iudiciis.
Installatio cum codicibus localibus conformari debet vel, absentibus codicibus localibus, cum National Fuel Gas Code, ANSI Z223.1/NFPA 54 .
This appliance requires connection to a 3-prong, 120VAC, 60Hz grounded electrical source. When installed, appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, NFPA 70.

GAS SUPPLEMENTUM TENTATIO

The appliance and its individual shut-off valve must be discon-nected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pres-sure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5 kPa).
INSTRUMENTUM enim perducemur ad examen Leak fabrica erat.

MAGNUS ANNOTATIUNCULAE IN CONSUMPTOR

Hanc institutionem Manual cum operatione tua ad futuram referentiam conserva.

When using any appliance generating heat, safety precautions must be followed. See the Operation Manual for safety precau-tions and follow them carefully.
Unitas institui debet et fundari rite ab institutione qualificato vel servitio technico.

Exempla quaedam huius unitatis veniunt instructa ad nexum libitum Wi-Fi. Ut Wi-FI functionality activate, area in qua unitas inauguratus est, signum Wi-FI requirit. Quaeso videre Operationem Manualis ad minimum Wi-FI requisita.

QUAQUAVERSUS

Priusquam inaugurari, quin omnes partes comprehendantur. Si partes aliquae laedantur et/vel absentes, tange venditorem vel acrem Authorised servitorem.

PARS INCLUSA

QUAQUAVERSUS	SPATIUM
Superficiem Burners et Caps	5
Superficiem Exuro Grates	3
Anti-consilium Bracket	1 bracket, 2 ANISOCYCLUM
Clibanus Probe	1
Plana Rack	1 vel 2 (prout exemplum)
Labentes Rack (exempla quaedam)	1
Libitum Audi Trim Kit	1 stringere, 2 ANISOCYCLUM

MATERIALS opus
The gas utility connection and house structure at each home may be different, so the specific parts required for connection to the house are not included with the product. The parts identified below are or may be required to complete the installation. For gas supply connections, always use new supply line and adapters and never use an old part for new range connections.

tools needed

Summa salus DE INSTRUCTIONIBUS

DICTIO Si indicium in hoc manuali non exacte secutum est, ignis vel concussio electrica evenire potest quae damnum proprietatis, iniuriae vel mortis personalis causare potuit.

Ad periculum tipping reducendum, unitas per bracket Anti-Tip- matis rite firmari debet.

Haec unitas electrically fundata est iuxta locorum ordinem.
Velamina parietis, calculi et scrinii circa unitatem, possunt sustinere calorem ab unitate generatum.

Clearances eorum et similitudines

Mensurae et alvi in hoc manuali indicant minimam alvi deiectivam.

Contactus superficies institutionis solida et plana esse debet.
Superficies super qua unitas sedet, construi debet de plywood valens ad sustentationem 150 lb.

Gas supply exigentiae

This product is equipped with a gas pressure regulator that oper-ates at a pressure of 5″ of water column for operation with natural gas or 10″ of water column when converted for operation with LP (propane).
Vestibulum rhoncus hujus mundi seu naturalem usum convertitur. In hac Missa range Vestibulum ante conversionem fieri nititur operari per instrumentum determinate fines mundi.
Ad propriam operationem, pressio gasorum naturalium moderatori suppeditatorum debet esse inter 5″ et 13″ aquae columnae. Gas enim LP, pressio directoris suppleta inter 10″ et 13″ columnae aquae debet esse.

Cum ad rectam operationem moderatoris reprimendam, limbum pressionis saltem 1″ plus quam pressionis operativae, ut supra dictum est, debet esse. Pressio moderatrix in limbo teli posita manere debet in copia linea cuiuscumque generis gasi adhibetur. Adplicamentum metallicum flexibile iungo utebatur ad iungendum teli gasi copia lineae ID 5/8 et maximam longitudinem 5′ habere debet.

ELECTRICAL SUPPLEMENTUM REQUISITIS

The power cord of this product is equipped with a 3-prong (ground-ing) plug which mates with a standard 3-prong grounding wall receptacle to minimize the possibility of electric shock hazard from this appliance. The wall receptacle is to be connected to a properly grounded dedicated circuit providing 120 VAC/60 Hz power and protected by a 15- or 20-Amp circuitus ruptor vel tardus ictu fuse.
Where a standard two-prong wall receptacle is encountered, contact a qualified electrician to have it replaced with a properly grounded three-prong wall receptacle. Do not use an adapter plug.

Tertia secta omnino tollere vel non (solum) de manu funiculus fixo.
Ground Fault Circuit Interrupters (GFCI) are not required or recom-mended for gas range receptacles.

Para cutout foramina

GRAVIS This range has been designed to comply with the maximum allowable wood cabinet temperature of 194 °F. Ensure the wall coverings, countertops, cabinets, and any other materials in contact with the range are rated for a minimum of 194 °F. If not, discoloration, delamination or melting may occur.

Before starting the installation process, confirm the installation space meets the following dimensions and clearances. Do not locate the range where it may be subject to strong drafts. Seal any open-ings in the wall, floor or cabinets in the installation space. Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for safe use of the range and provide a minimum clearance. Contact surface must be solid and level. Follow all dimension requirements to prevent property dam-age, potential fire hazard and incorrect countertop and cabinet cuts.
Locum extensionis institutionis debet esse basim plywood in eodem gradu vel altiore quam ambiente pavimento tegumentum (durae, tegulae, linoleum, etc.) ut movendi teli ad purgandum et serviendum et aptam airflow ad ictum praebeat. .

Integumentum materiae area curare potest temperaturis saltem 167 °F resistere. Integumenta parietum, calculis, scriniis, et quibusvis aliis materiis in contactu cum teli, potest resistere temperaturis usque ad 194 °F a range generatis.

PRAETERLABOR, in gas range SPECIFICATIONS
ratio exterior	• Height: 351/2″
	• Width: 297/8″
	• Depth: 269/16″
	• Height to cooking surface: 36″
Electrical requirements 120V/60Hz
Net pondus	s 242
facultatem clibano	L cubicus ft

Clearances in calculis et arcae dimensionibus vexillum nituntur ut infra in chartis VEXILLA DIMENSIONIBUS monstratum est. Vide Figura II ad Clearances requiritur.

SIGNUM DIMENSIONEM
Altitudo countertop	36 "
Altitudo countertop	25 "
crassitudine castella countertop	11 / 2 "
scrinium altitudo	341 / 2 "
scrinium profundum	24 "
Distantia rangetop et superius scrinium	30 "

clearances
Lapsus-In Gas Range institutionem gratuitam institui potest cum nullo tergo emissione vel lapsus-in institutionem pro usu cum dorsum stringere. Utraque bene, latitudo cutout eadem est, sed altitudo cutout alia est. Vide infra chartulam DIMENSIONES CUTOUT et Figuram 3 pro cutout requisitis.

Cutout DIMENSIONES
LIBERATIO CUTOUT
latitudo	30 "
Profundum	25 "
PRAETERLABOR in cutout
latitudo	30 "
Profundum	2311 / 16 "

NOTE:

PRO INSTALLATIONE INSTALLATIONIS 6 MINIMUM TENERE a cutout ad tergum et latera margines ANTISTITI.
PROJECTUM CISTELLUM saltem XXX "Supra COOKTOP AEQUOR et non plus quam XIII" SUPER COKTOP AEQUOR.
TENERE 0″ MULTATIO AD TERGUM ET PARTEM TULI.

NOTA

CUTOUT INSTALLATIONIS USUS TERRAE CULTUS VAS 25' Abyssus est.

CUTOUT PRO PRAETERLABOR INSTALLATION CUM NO TERGO CULTUS REQUISITIS 23 11/16 ALTUM.
OCULI FACIES COUNTERTOPS plana et exaequata sint.

DE MODO PROCEDENDI INSTALLATION

IUDICIUM LACERATIO, rei alienae, PRAETERMITTO PERICLUM
Cum inaugurari, movens vel ad aliquem usum applicandum, apparatum tutelae proprium gerunt, inter caestus repugnantes incisos, caligas calceos et vitreos calido toed.
GRAVIS Defectum ad removendum packaging materias in damnum ad instrumentum provenire potuit.

Remove all tape and packaging materials. Check for film on stainless steel parts, padding/spacers on and around door and face of oven, cardboard and plastic on and around racks, inside storage drawer, etc. Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners to remove tape or glue. These products can damage the surface of your range.
Inventarium omnium partium solutarum contra chartulam comprehensam in pagina 2. Perscriptio pro damno navium et/vel partium absentium. Referre aliquem laesum et/vel absentis partes ad venditorem localem tuum.

To reduce the weight of the range while being moved, adjusted and installed, set aside cooktop grates, cooktop burners, oven racks and any other accessories until the unit is installed and ready for use. During installation, service, gas conversion and leveling, it is recommended to remove the oven door and drawer. See the Operation Manual for instructions on removing the oven door and drawer.

ad conversiones promovendas OPTIONAL

LP GAS CONVERSIONE
ADMONITIO INCENDIO PERICULUM

Failure to properly convert the range to the fuel type used at the installation site can result in increased risk of fire, burn injuries and property damage. The conversion must be performed by a qualified service technician in accordance with the manufacturer’s instruc-tions and all local codes and requirements. The agency performing this work assumes responsibility for the conversion.

The Slide-In Gas Range is preset for use with Natural Gas and can be converted for use with Propane (LP). Conversion for use with propane must be performed by a qualified technician in accordance with the installation instructions and local codes. The agency per-forming this conversion assumes responsibility for the conversion to propane use.

ALTITUDO CONVERSIONE
MONOXIDE PERICULUM CARBON MONITUM

Reduced air pressure and oxygen availability at high altitudes may affect proper burner combustion. Failure to properly convert the range for high altitude installations can result in increased risk carbon monoxide. The conversion must be performed by a qualified service technician in accordance with the manufacturer’s instruc-tions and all local codes and requirements. The agency performing this work assumes responsibility for the conversion.

Unitates convertendae sunt ad operationem propriam ad elevationes supra sex 6,000 pedum. Contactus acutus mangone petere Altitudo Conversio Ornamentum. Altitudo altitudinis conversio requirit omnia popina et orificia turibula mutanda. Sequere instructiones singulas cum ornamentum conversionis comprehendi. Moderator apponi debet secundum genus escae in usu ad institutionem situs.

ANTI-TIP BRACKET
MONITUM APEX PERICLUM

Puer vel adultus potest teli capere et laedi vel occidi. Comproba fabrica anti-tips per instructiones institutiones recte inaugurata et occupata est. Perficite anti-tip fabrica re-pugnatur cum range movetur.

Non sine anti- tip fabrica operantur teli positis et occupati. Defectum hanc cautelam sequi potest vel in morte vel in pueris vel adultis gravis ardet. Adtritio crura noli tollere. Faciens ita prohibebit teli ab anti- tip fabrica esse munitum.
Ad periculum titionis redigendum, rhoncus in pavimento servandus est a recte institutis Anti-Tip Bracket et cochleis teli refertis. Defectum instituendi Anti-Tip Bracket permittet teli, si nimius pondus in ostio aperto positum est vel si puer super eum ascenderit. Laesio gravis vel ex effusis liquidis calidis vel ex ipso range.

CONLOCO ANTI-APEX BRACKET

Formulae usui instructae cum Anti-Tip Bracket, collocare institutionem aream Anti-Tip Bracket. Anti-Tip Bracket potest institui in angulo dorsi vel posterioris vel posterioris spatii institutionis, et solum unum Anti-Tip Bracket necessarium est.
Nota locum cochlearum pro Bracket Anti-Tip.
Applicare Anti- consilium Bracket in area vel muro.

Wood Construction Installation: Drill a 1/8″ pilot hole where screws are to be located. If bracket is to be mounted to the wall, drill pilot hole at an approximate 20° downward angle. Screw must enter wood.
Masonry Construction Installation: Due to the variety of masonry materials that may be present at installation site, hardware is not provided for attaching the Anti-Tip Bracket to masonry. If the bracket is to be mounted to masonry or ceramic floors, attach using two 5/16″ OD sleeve anchors (with 1/4″ bolt, either hex bolt head or hex nut head) rated for minimum 300 lb tension for the masonry material present at installation site.

AGMEN NOVISSIMUM ORGANUM INSTALLATION (libitum)
If there is no counter surface around the back edge of the installa-tion space, or if the countertop cutout is greater than 25″ deep, this may prevent the range from being installed flush to the back wall. If this occurs, a trim kit can be installed to cover a gap up to 1″ in width. See Figure 4.

CONLOCO NOVISSIMUM TRIM

Conlineare filler trim ad ascendendum foramina.
Cochleas affigere provisum ut ostenditur in Figura V.

GAS SUPPLEMENTUM CONIUNCTIO
PRAEMONITIO Ignis, CREPITUS PERICULUM

Servitio atque institutionem debent fieri per qualified installer, propellente aut gas servitio elit.

Installatio cum codicibus localibus conformari debet vel, absentibus codicibus localibus, cum National Fuel Gas Code, ANSI Z223.1/ NFPA 54 .
Ne nexum ad regulam subruere. Moderator alea iacta est. Overtightening may crack the moderator resultans in a gas Leak and possible fire or explosion.
Ne flamma ad reprimendam libero utere.

Procuratio hoc opus exercens responsabilitatem sumit pro qualitate operis peracti, incluso reprimendo per pinum et ad institutionem praestandam in codice requisita occurrit.

CONIUNCTI TO GAS SUPPLEMENTUM

Pelagus gas copia valvae claudite.

Because the range must be pulled away from the installation space to provide access to the gas regulator connections, and because hard piping restricts movement of the range, the range can only be installed using a CSA International-certified flexible metal appliance connector. Contact Sharp Customer Service if local codes require a hardpiped connection. Never use an old connector when installing a new range.
Ne pinum gasi, iuncturam organi iuncturam adhibeas vel taeniolam fistulam cum Teflon in omnibus filis masculinis (externis) involvas.
Instrue linea gas manuale valvae clausae valvae in linea gasi in loco facili aditu extra teli. Consumentem instrue in situ et operatione valvae clausae.

As shown in Figure 6 below, install male 1/2″ flare union adapter to the 1/2″ NPT internal thread at the regulator inlet using no more than 15 ft-lbs of torque. Use a backup wrench on the regulator fitting to avoid damage.
Ut in Figura 6 infra ostenditur, masculinum 1/2″ vel 3/4″ exardescere adaptatorem unionis ad NPT internam stamina valvae manualis clausulae utentis, non plus quam 15 pondo torques utens shutoff valvae ut custodiant a conversione.
Iungo ad instrumentum flexibile metallum iungo adaptor in iugis.

Positio range ut nexum permittat ad valvae clausulae.
Connectere ad instrumentum valvae flexibile instrumentum iungo.
Cum omnes nexus factae sunt, distributio e spatio institutionis extrahatur. Ut valvae clausae-offa apertae sint et omnes fines rangerum in positione off sunt.
Turn in valvulae copiae gasorum praecipuae et liquido Leak detectoris (vel saponis et aquae utere) ad omnes articulos et specus ad perstillationem in systemate reprimendam.
Forma gasi connectentis flexibilis ut ostensum est. Hoc impediet iungo flexibile, ne unitatem pigeat vel claudat, cum unitas in suum ultimum locum eicitur.

ELECTRICAL SUPPLEMENTUM CONIUNCTIO
WARNING ELECTICAL SHOCK HAZARD

Institutionem electricam fundari debet ad normam locorum localium vel, absentibus codicibus localibus, cum National Electrical Codice, NFPA LXX.
Non est extensio funis utuntur hoc opus.
Potentia funiculi et obturaculum mutari non debet. Si exitus non convenit, exitum proprium electrician inauguratum habebit.
Remove the house fuse or open the circuit breaker before begin-ning installation.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor con-nection to an electric range.
Applicatio rite instituenda et fundata a provisore qualificato servitii.
Hoc instrumentum supplendum est cum proprio voltage et frequentia et individuo connecti, ramo proprie fundato circuii munito, ambitu rupto vel fuso habito amppotus ut certa in rating laminam. Aestimatio laminae sita est in perscriptorem repositionis. Post institutionem instrue consumpturam ubi principale disiunctio electricae sita est et quomodo operandi est.

AS LOCUS

MAGNUS all septa gravia sunt. Illapsum range aream laedere potest. Cura utere cum mo- teli. Utere cingulo cum teli movens ne aream laedat, vel cardboard, plywood vel rigida plastica utere, ne aream laedat dum teli lapsus est.
Cum unitas in institutione spatii et gradus recte collocata plures conatus requirere potest. Commendatur crura diligenter metiri et aptare antequam in spatium institutionis ponatur, sicut crurum aequabilitas difficilis potest accommodare semel in ultimo positione eius.

TO LOCO AS

Mensura taeniola utere ut metiaris a pavimento usque ad summum cacumen calculi in omnibus quattuor angulis spatii institutionis.
Dum ambitus extra institutionem spatii adhuc sistitur, crus aequationem singulis angulis accommodare ita ut distantia a pavimento usque ad extremum extremitatis cooktopi mensuras in spatio institutionis aequat.
Duo homines utentes, in ultimam institutionem suam locationem vagantur, caventes ne calculis, tabulato vel instrumento laedantur.
NOTES:
- Noli movere unitatem impellendo vel trahendo ostium vel imperium panel. Noli tollere per oras cooktop. Ventilabis, trahere vel levare tantum in locis corporis vel structuralibus, ut clibano, facie clibano vel angulis posterioribus eminus.
- Be careful not to pinch or kink the gas or electrical connections. If unit does not move in smoothly, check for obstructions Do not attempt to force the unit into position.
- Dampimpendens autem countertops ubi cooktop imminet cum aqua soapy permittat facultatem labi in positione magis aequaliter.
- LABIUM metallicum sub unaquaque parte cooktopi super scrinium countertops ad proprium unitatis subsidium praeficiendum est. Cooktop in directo consistere non debet vel alioquin damnum inferre posset ad warantiam cooktop evacuandam. Vide figuram 7 .
Ensure the gas supply line is not damaged.
Ensure the back leg of the range has engaged properly into the Anti-Tip Bracket. If visual inspection is not possible:
- Range volutpat ante.
- Confirma Anti-Tip Bracket secure adnectitur pavimento vel muro in recta positione secundum institutionem instructionis.
- Plene lapsus tergum in murum ita ut crus aequandi cum Anti-Tip Bracket dimicat.
To ensure baked goods, such as breads and cakes, come out even and level, confirm that the range is level by placing on the center rack position. Check level both front-to-back and side-to-side. Use adjustable pliers to adjust leveling legs as necessary to level the range.
GRAVIS: The weight of the product is to be supported by the leveling legs. When adjusting leveling legs, do not adjust so far that the weight of the product is supported by the cooktop resting on the countertop. If countertops are not level, leveling the range may cause one or more corners of the cooktop to not contact the countertop surface. If this occurs, the range can be installed unleveled to allow the cooktop to contact the entire perimeter. Be advised that this may affect performance for some baked goods. In these cases, foam tape rated for 194 °F minimum can be placed around countertop edge to fill the gap caused by leveling. Do not use caulking or other adhesives that would bind the cooktop to the counter.
Restitue ostium, perscriptorem et fornacem quatit.

SURFACE BURNER ASSEMBLY AND LOCATIO

Positio superficies capitibus turibulum super pileos turibulum ut ostensum est. Superficies turibulum capita plana et parallela cum cooktop curare. Pone galeros magnitudines adaptas super uniuscuiusque superficiei turibulum caput. Vide figuram VIII.
Oriens turibulum craticulas inveniendo pittacia subtus singula craticulae. Omnes gratis sunt stamped cum tergo subtus in fine craticulae prope spiramenta instituenda, et L indicando craticulam sinistram, M indicando craticulam mediam, R indicando craticulam dextram. Craticulas in poplite pone cum extremitatibus L TERGO, M NOVISSIMIS et R NOVISSIMIS positis rectis. Grates non convertuntur et recte ponendae sunt. Vide figuram IX.

CONFIRM operationis

Postquam range inauguratus est et conglobatus, copiae gasorum lineae diligenter repressae sunt pro pinum et funiculus electricae conexus, operationem omnium turibularum cooktopi confirmant. Ad aliquem aerem purgandum, qui intra telonium gas tubing remanet, commendatur ad operationem turibuli confirmati antequam operationem furno confirmet.

Ad confirmandas COOKTOP NEGOTIUM

For each burner, testing one at a time, rotate the knob to the Lite position. Confirm that clicking is heard and visually observe the electrode sparking properly to the burner cap.
Allow a few seconds for the burner to ignite and observe flame quality. Light all surface burners and set to the highest setting.
- Soft blue flames indicate normal operation for natural gas.
- Blue flames with yellow tips on the outer cones indicate normal operation for LP gas.
- Yellow flames indicate abnormal operation for any gas. Call for service.
For each burner, compare flame height at the highest and lowest setting and confirm Lo heat is sufficiently low for the size of burner being tested.
For each burner, rotate the knob quickly to the lowest setting and confirm the flame is not extinguished.
Turn off all but one burner. With one burner still at the lowest setting, quickly open and close the oven door and confirm the flame is not extinguished.
If burner flame is extinguished during any of the above tests, or if flames are unacceptably large at the lowest setting, adjust the low flame setting.

ACCOMMODUS FLAMMA PRAELATIO

Light all surface burners. Set all burners at the highest setting except the one being adjusted. Set the burner being adjusted to the lowest setting.
Remove the knob by pulling firmly straight out.
Insert a small, flat-blade screwdriver into the valve shaft. Fit tip of screwdriver into small screw head at base of valve shaft. See Figure 10.
Holding the valve shaft with one hand to prevent it from turning, turn the screwdriver to adjust flame height (counter-clockwise increases flow; clockwise decreases flow).
Repeat for any burners requiring calibration at the lowest setting.
When adjustment is complete, repeat the full burner operation testing described above.

Ad confirmandas CIRCUMVENIO NEGOTIUM

Ut omnia sarcina sublata sint, et clibanus inanis est, excepto furno eculei. Clibano ostium claudit.
Tange Bake codex in tabula dicione. Aequaliter Nubila temperatura est 350 °F. Utere keypad numerorum accommodare ad occasum temperatura 170 °F. Tange START/ENTER codex.
Listen for a clicking sound from the spark igniter followed by a whoosh sound of ignition. If the oven does not ignite immediately, the spark igniter will only activate for a few seconds. If this happens, the oven control will turn off the gas flow to the burner, wait 10-15 seconds, and re-attempt ignition. It will make a total of 3 attempts before generating an error. The entire process should take less than 1 minute.
It is normal for the oven control to attempt igniting 2 or 3 times immediately after the unit is first installed due to residual air in the gas lines inside the range. If the oven takes multiple attempts to ignite, cancel the bake mode and restart to confirm the oven ignites on the first attempt. Once all air has been purged from the gas lines, the oven should ignite immediately on first attempt. If oven continues to require multiple attempts to ignite, contact a qualified service provider for investigation and repairs.
Allow Bake mode to operate until the oven has preheated to 170 °F. Confirm the display indicates the temperature increasing and signals when the temperature is reached. Touch CLEAR/ OFF pad to stop the Bake mode.
Codex Broil tangere in tabula potestate. Tange START/ENTER codex.
Listen for a clicking sound from the spark igniter followed by a whoosh sound of ignition. If the broil burner does not ignite immediately, see step 3 above.
Observe the broil flame quality through the oven door window. If flames do not carry all the way around the broil burner, this may indicate air in the gas lines. Allow the burners to operate for a 1–2 minutes to purge the lines of any remaining air.
Touch CLEAR/OFF pad to stop Broil mode. If anything does not operate correctly or if broil flames appear abnormal, call for service.

Exemplar et serial numerus LOCATION

Exemplar et numerum serialem opus sunt cum operas mos contingentes et partes subcriptio producti et ordinis substituendi sunt. Nomen bracteae pittacium certificationem, aestimationem ac identitatis informationem contineat. Sita est intra perscriptorem repositionis vel lateris sinistri vel dextrae tabulae.

Cura, purgatio et sustentacionem

Pertinet purgatio operationem Graecorum disciplinam.

Quæ apta antequam me invocetis

Lege CORAM TE sectiones instructionis et operandi in Opera tua Manual. Ut et tempus nisi. Elenchus communes eventus qui non sunt effectus operis defectivi vel materiae in hoc instrumento.
Refer to the warranty in your Operation Manual for Sharp’s toll-free service number and address. Please call or write if you have inquiries about your product and/or need to order parts.

De SALVTEM

CALUMNIA Corporation
100 Paragon Drive
Montvale, Nova Jersey 07645
USA 1-800-BE-SHARP (1-800-237-4277)

Documenta / Resources

	ACER SSG3061JS Slide in Naturalis Gas Range [pdf] Instructio Manual SSG3061JS, SSG3065JS, SSG3071JS, SSG3061JS Slide In Naturalis Gas Range, Slide In Naturalis Gas Range, Naturalis Gas Range, Gas Range, Range
	ACER SSG3061JS Slide in Naturalis Gas Range [pdf] User Manual SSG3061JS Slide In Natural Gas Range, SSG3061JS, Slide In Natural Gas Range, Natural Gas Range, Gas Range, Range